|
Our D2000 - PTFE Swivel Joint is a variant of the basic form. It is internally lined with PTFE and is equipped with a special seal, making it suitable for extremely aggressive products. The ball tracks are encapsulated by two O-rings, neither dirt from the outside nor product from within (in case of leakage) can reach the ball track. Should the main seal fail, leakage is indicated through the leak detection port. This port is PTFE sleeved, thus contact of product with carbon steel components is prevented. The bearing module with its deep flame hardened ball race and the specially designed seals guarantees a reliable and long life working swivel joint. The bearing module and the seals can be easily replaced. All carbon steel parts could be made of stainless steel. The D2000 - PTFE swivel joint is equipped with special flanges. The connection flanges for the pipes are included in the swivel joint order. These flanges are welded to the pipes and then PTFE lined as an assembly.
Specifications
Material:
Carbon steel, PTFE lined Seal Material:
PTFE Allowable internal pressure (gauge pressure):
Operational: 10 bar
Test pressure: 15 bar Allowable temperature range:
-10° C to +150° C (temperature range may be restricted due to seal material) Weight:DN 50 - 9 kg
DN 80 - 12 kg
DN 100 - 18 kg
DN 150 - on request
DN 200 - on request
Variants
DN 50
DN 80
DN 100
DN 150
DN 200
Spares & Accessories
If you cannot find what you are looking for below, please click here to complete our spares inquiry form and a member of our Sales team will be in contact with you shortly.
Distributors
| Country |
|
Brochures
-
D2000 PTFE Swivel Joints Data Sheet
Download
-
Swivel Joints General Information Bulletin
Download
Downloads
-
D2000 PTFE Swivel Joints Data Sheet
Download
-
Swivel Joints General Information Bulletin
Download
Related Products
-
Universally employable D2000 Swivel Joint optimizes practically all fluid-transport operations and meets the highest standards.
-
The D0002 Swivel Joint forms the basis for swivel joints with one ball track. It has a minimal structural length, minimal external diameter and minimal weight. The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline.
-
The D1010 is the standard swivel joint with two ball tracks. It is usually used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. This gives the swivel joint a high degree of load capacity and long service life, even under extreme loads.
-
The D1133 swivel joint is a variant of the basic D0002. It is the ideal swivel joint for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight. The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline.
-
Easy, safe and economical, the B0030 Marine Loader has proven its success over many years of loading and unloading tanker ships with fluids such as crude oil, chemicals, and liquid gas.
-
With our B0028 Marine Loading Arm we offer a cost efficient solution for the loading and unloading of riverboats. The B0028 is also employable for smaller coastal ships at locations with moderate tidal ranges.
-
The E2824 to E2839 Standard Bottom Loading arm is designed to load and unload mineral oil or chemical products from road and rail tankers.
-
The E2386 Bottom Loading Station is especially designed for the loading and unloading of road and rail tankers with a vapor return line.
-
The solution for demanding applications, our E2632 Parallel Loading Arm combines equipment for the loading of products and the unloading of returning gas vapors. These Loading Arms are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.
-
The E2630 Long Reach Top Loading Arms with Vapor Return Hose are used for hydrocarbons (e.g. gasoline), toxic and aggressive media. The E2630 is the most economical solution for the process of sealed loading on manholes with vapor return.
|