We can supply products for use in a
variety of offshore applications including the receiving of fuel, oil, oilbased
mud and potable water from supply vessels or on hose reels for the loading of
the supply vessel.
Wheaton DRY-BREAK Couplers and Adapters are designed for total safety in
low-pressure, petroleum and light chemical applications. Fluid cannot flow
until the Emco Wheaton coupler has been locked into position on an Emco Wheaton
Adapter and the valve opened. The coupler can only be disconnected from the
adapter when the valve has been closed. Rated for a working pressure of 85 psi
The TODO Hose Swivels are used to allow free hose movement without imparting torque stresses to the assembly, significantly reducing the risk of premature hose failure.
The D0002 Swivel Joint forms the basis for swivel joints with one ball track. It has a minimal structural length, minimal external diameter and minimal weight. The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline.
The first choice for
the safe handling of hazardous, valuable or environmentally sensitive media.
Complementing the Emco Wheaton DRY-BREAK range, these products are available
specifically for high pressure applications. Working Pressure of PN 10-25 (145
- 363 psi) Todo are pleased to offer proven solutions for DEF/AdBlue deliveries
to small containers, IBC totes and bulk storage tanks giving minimal residual
spillage upon disconnection.
The D1133 swivel joint is a variant of the basic D0002. It is the ideal swivel joint for nearly all applications in the chemical industry. It has a minimal structural length, minimal external diameter and minimal weight. The internal flange makes it possible to change the seal without removing the swivel joint from the pipeline.
The D1010 is the standard swivel joint with two ball tracks. It is usually used where large size swivel joints have to take heavy loads (typically for Emco Wheaton Marine Loading Arms). Both ball tracks of the carbon steel version are hardened and polished. This gives the swivel joint a high degree of load capacity and long service life, even under extreme loads.