| TYPE | BH |
| diameter 4=4 | 4 |
| material / seal material A= Steel / VitonB= Steel (LT) / Viton (LT) S= Stainless Steel / Viton | A |
| inlet flange orientation / type 1= below / 4” 150 lbs. WN RF 2= below / DN100 PN16 11 B13= above / 4” 150 lbs. WN RF 4= above / DN100 PN16 11 B1 | 1 |
| arm orientation L= left hand design R= right hand design | L |
| A-length (mm) | 1000 |
| apex swivel joint N= without apex swivelX= D2000 fixed hose Y= D2000 standard hose | N |
| B-length (mm) | 1300 |
| hose typeC= composite hoseE= rubber hose Elaflex (LT) N= provided by customer S= stainless steel hoseT= composite hose Trelleborg | C |
| TYPE | BH |
| Hose length (mm) | 1000 |
| Outboard swivel joint A= ali cast swivelB= D2000 aliC= provided by customer D= D2000 ali (LT) | A |
| ERS emergency release coupler A= with TBA40B= with TBA40 (LT)C= with NGX4 D= with NGX4 (LT)N= without ERS | N |
| special equipment C= E0656 check valve N= withoutS= E0262 spacer spool | N |
| API Coupler A= J0451-051 B= J0452-051 C= J0550-001D= J0452-053 (LT)N= provided by customer | A |
Bottom Hose Loading Arm with Counterweight Balance
The Bottom Hose Loading Arm with Counterweight Balance enables efficient bottom loading and unloading of tank trucks. It is recommended for use with gasoline or diesel products. You can order special materials with this design.
| TYPE | BH |
| diameter 4=4 | 4 |
| material / seal material A= Steel / VitonB= Steel (LT) / Viton (LT) S= Stainless Steel / Viton | A |
| inlet flange orientation / type 1= below / 4” 150 lbs. WN RF 2= below / DN100 PN16 11 B13= above / 4” 150 lbs. WN RF 4= above / DN100 PN16 11 B1 | 1 |
| arm orientation L= left hand design R= right hand design | L |
| A-length (mm) | 1000 |
| apex swivel joint N= without apex swivelX= D2000 fixed hose Y= D2000 standard hose | N |
| B-length (mm) | 1300 |
| hose typeC= composite hoseE= rubber hose Elaflex (LT) N= provided by customer S= stainless steel hoseT= composite hose Trelleborg | C |
| TYPE | BH |
| Hose length (mm) | 1000 |
| Outboard swivel joint A= ali cast swivelB= D2000 aliC= provided by customer D= D2000 ali (LT) | A |
| ERS emergency release coupler A= with TBA40B= with TBA40 (LT)C= with NGX4 D= with NGX4 (LT)N= without ERS | N |
| special equipment C= E0656 check valve N= withoutS= E0262 spacer spool | N |
| API Coupler A= J0451-051 B= J0452-051 C= J0550-001D= J0452-053 (LT)N= provided by customer | A |
Sizes:
- 4”
Construction Material:
- Carbon Steel
Seal Material:
- V = Viton
Design Pressure:
- Pressure drop and flow rate calculations available upon request
Accessories:
- Hose
- Outboard swivels
- Spacer spools
- API Couplers
- Others
