Sizes:
Construction Material:
Inlet Flange:
ANSI 150 & 300 lbs / EN PN16 & 40nly)
Design Pressure:
Design Temperature:
Balancing Method:
(Based on seals and accessories / Broader temperature ranges are available on request)
Sizes:
Construction Material:
Seal Material:
Design Pressure:
Design Temperature:
Balancing Method:
Options:
TYPE | BH |
diameter 4=4 | 4 |
material / seal material A= Steel / VitonB= Steel (LT) / Viton (LT) S= Stainless Steel / Viton | A |
inlet flange orientation / type 1= below / 4” 150 lbs. WN RF 2= below / DN100 PN16 11 B13= above / 4” 150 lbs. WN RF 4= above / DN100 PN16 11 B1 | 1 |
arm orientation L= left hand design R= right hand design | L |
A-length (mm) | 1000 |
apex swivel joint N= without apex swivelX= D2000 fixed hose Y= D2000 standard hose | N |
B-length (mm) | 1300 |
hose typeC= composite hoseE= rubber hose Elaflex (LT) N= provided by customer S= stainless steel hoseT= composite hose Trelleborg | C |
TYPE | BH |
Hose length (mm) | 1000 |
Outboard swivel joint A= ali cast swivelB= D2000 aliC= provided by customer D= D2000 ali (LT) | A |
ERS emergency release coupler A= with TBA40B= with TBA40 (LT)C= with NGX4 D= with NGX4 (LT)N= without ERS | N |
special equipment C= E0656 check valve N= withoutS= E0262 spacer spool | N |
API Coupler A= J0451-051 B= J0452-051 C= J0550-001D= J0452-053 (LT)N= provided by customer | A |
