A heating cable is attached along the tubes and elbows.
The swivel joints are bridged by electric cables.
Designed to keep loaded fluids in a liquid state, our Heating Systems are used for products with low and middle temperature ranges or if there is no other heating media available.
Depending on the heating temperature, options include; electric heating, trace heating or covered heating.
Electric Heating System:
- Max. product temperature
- 120°C limited by self-limiting cable
- 250°C limited by resistance heating cable
Trace Heating System::
- Size - ½ "
- Working pressure - max. 20 bar
- Seals - Viton, PTFE
- Max. product temperature - 100°C
- Connection flanges - ½ "
Jacket Heating System:
- Size - ½ " (approx. 10mm ring slot)
- Working pressure - max. 20 bar
- Seals - PTFE, PTFE-compound
- Max. product temperature - 100°C PTFE seals or 250°C PTFE-compound seals
- Connection flanges - ½ "
- Electric heating system
- Trace heating system
- Jacket heating system
Overfill Safety Device
Secondary safety system which prevents product overflow, for example in the case of an incorrect pre-selected loading amount.
Parallel Device for Bottom Loading Arms
The arm is fitted with six swivels for complete 3-axis movement of the tanker connection, allowing for tanker height changes during filling/discharge. The arm is additionally fitted with a parallel bar that holds the tanker connection arm ("B"-length) in a horizontal position irrespective of the primary arm ("A"-length) position. This makes tanker connection and disconnection much easier. The B-length also has a gas spring fitted allowing the operator to raise and lower the B-length with total ease.